ICAO Doc 10057 ATSEP qualification training with SkyRadar FreeScopes and Moodle e-learning: practical radar, CNS/ATM signal analysis and guided exercises.
For Air Traffic Safety Electronics Personnel (ATSEP), technical knowledge must eventually become demonstrable competence. Understanding a surveillance algorithm in a lecture is one step; observing how it performs with measured signals, changing its parameters and explaining the result is another. The same distinction applies to communication networks, navigation signals, radio-frequency (RF) measurements and system troubleshooting.
In the accompanying video, SkyRadar presents an approach that connects e-learning, live hardware, recorded data, simulation and browser-based signal processing. The objective is to help instructors build structured practical exercises around the learning areas addressed by ICAO Doc 10057.
ICAO Doc 10057, Manual on Air Traffic Safety Electronics Personnel (ATSEP) Competency-based Training and Assessment, provides guidance to air navigation service providers (ANSPs) and training organizations for developing competency-based ATSEP training and assessment programmes.
Within this framework, qualification training builds on basic training and addresses the technical functions associated with an ATSEP's responsibilities. The relevant fields include surveillance, communication, navigation, data processing and system monitoring and control. Unit-specific training and competence assessment remain the responsibility of the provider and the applicable regulatory framework.
A practical training environment is particularly useful when an objective requires trainees to apply a method, interpret a measurement or investigate the consequences of a changed parameter. It allows instructors to move from a description of a system to an observable exercise.
SkyRadar FreeScopes is a browser-based environment in which trainees build signal-processing workflows, connect measurement or simulated data sources and visualize the results. An instructor can introduce a concept using a common dataset, while participants explore different processing parameters in their own workspaces.
The wider SkyRadar training environment can combine several kinds of equipment and data:
Not every exercise requires live equipment. Previously recorded signals and generated test data allow students to repeat measurements, compare approaches and prepare for laboratory work. Additional CNS-to-FreeScopes interfaces and exercises are being developed and evaluated as part of the expanding training environment.
In the video, FreeScopes is used to observe radar data in an A-Scope and a plan position indicator (PPI). The demonstration introduces source suppression and then moves to recorded measurements, moving target detection, Doppler analysis and the fast Fourier transform (FFT).
These experiments help trainees examine the relationship between a measured return and the processing choices that influence what appears on a radar display. Related training topics include sensitivity time control (STC), constant false alarm rate (CFAR), moving target indication (MTI), plots, tracks, clutter filtering and Kalman-based tracking concepts.
Communication training connects time- and frequency-domain signals with modulation and transport principles. Exercises may cover sampling, filtering, amplitude and frequency modulation, QAM/QPSK constellations, eye diagrams, RF voice, Voice over IP and the effects of latency, jitter and packet loss.
Navigation-oriented activities address GNSS positioning and time references, one-pulse-per-second (1PPS) synchronization, timing drift and the principles underlying systems such as ILS, VOR and DME. Antenna patterns, propagation and link budgets provide a connection between the signal and the physical installation.
Data processing is not treated as a separate abstract topic. Trainees can compare FFT and windowing choices, quantization, signal combination, filtering and data presentation on actual or simulated inputs. In broader CNS/ATM training, the same experimental approach can support understanding of surveillance messages, network transport, monitoring, fault isolation and troubleshooting.
One of the central demonstrations starts with a radar signal receiver connected to FreeScopes. The instructor places processing and visualization blocks into a workflow, examines the live signal and then uses a previously recorded movement scenario.
Source suppression changes the display; moving target detection helps distinguish moving returns; FFT processing allows the direction and frequency characteristics of movement to be examined. The exercise also shows a generated sine wave being superimposed on the observed signal. This provides a straightforward starting point for discussing signal addition, interference and processing behaviour.
The educational point is the ability to test an assumption rather than merely read about an algorithm. Students can reproduce the original workflow and then change individual processing steps to see what follows.
Hands-on software becomes more useful when the exercises are embedded in a coherent course. The video illustrates the use of a Moodle-based e-learning environment with SCORM-compatible learning content, combining explanatory text, instructional videos, prepared FreeScopes workflows and practical tasks.
The example is signal quantization. Trainees first study a short explanation, watch an accompanying video and then copy a prepared signal-processing workflow into FreeScopes. A generated sine wave is passed through a quantization block. By changing the number of bits, they can observe how the representation of the signal changes. They can then continue with additional signal combinations and measurements.
In this model, e-learning provides the sequence and instructions; FreeScopes provides the experimental environment. A teacher can distribute the same starting exercise to many trainees while allowing each participant to explore the result individually. The video also shows that comparable lessons can be developed for topics such as polarization, link budgets and eye diagrams.
The approach can be used to organize an ATSEP training progression:
This does not replace an ANSP's responsibility to define competence requirements, establish assessment evidence or provide equipment- and site-specific unit training. It does provide a way to connect theoretical course material with practical experiments that instructors can repeat and adapt.
The accompanying video presents the SkyRadar training hardware, walks through signal processing with FreeScopes and demonstrates how an e-learning lesson leads directly into a laboratory exercise. It is intended for ATSEP instructors, technical training organizations, ANSPs and CNS/ATM engineers considering how to structure practical qualification training.
For related reading, see Understanding ICAO Doc 10057 and ATSEP Competency-Based Training and ICAO Doc 10057 and Hands-On ATSEP Surveillance Qualification Training.
Learn more at SkyRadar.com, or contact sales@skyradar.com to discuss a curriculum-based CNS/ATM laboratory concept.